Skip to main content

Grizzly Insulation Co

Englewood Insulation  ›  Spray Foam Insulation

Spray Foam Insulation in Englewood, CO

Old houses are full of spaces fiber cannot fix: kneewalls, dormer cheeks, cellar rims, shallow cavities. Foam was practically invented for Englewood’s housing stock.

Your local crew, minutes away

Commerce City HQ · both Englewood ZIPs

Where does a bungalow actually need foam?

In pre-war homes the losses hide in the angles. Here’s where foam earns its keep in the Englewood houses we assess:

Kneewalls & dormer cheeks in half-story homes
Cellar & basement rim joists on old foundations
Shallow or blocked wall cavities plaster can’t spare
Porch conversions & additions built without insulation
TRUSTED PRODUCTS & PARTNERS

The Brands Behind Every Grizzly Install

We don’t install mystery material. Every Arvada project uses products from the industry’s most trusted manufacturers.

01THE PROBLEM

Plaster Outside, Nothing Inside. Foam Fixes That Without Demolition.

You cannot batt a two-inch cavity or dense-pack a blocked one, and nobody wants their 1920s plaster opened up. Injection and spray foam deliver insulation into the spaces old construction left empty, through small openings, at R-values fiber cannot reach per inch.

AKneewalls radiating cold into bedrooms

The upstairs bedrooms in a story-and-a-half bungalow sit inches from the roof behind bare kneewalls. Closed-cell foam on those short walls and slopes is the single biggest comfort move in Englewood’s signature floor plan.

BCentury-old rims above damp cellars

The rim joist over a stone or early-concrete foundation leaks air and wicks moisture. Two inches of closed-cell seals and insulates the whole band, one morning, decades of benefit.

CCavities too shallow for anything else

Some Englewood walls were framed at depths no batt fits and dense-pack cannot reach code in. Injection foam fills them completely through small patched openings, plaster intact, cold walls retired.

DPorches that became rooms, but not warm ones

Half of Englewood’s sunrooms and back bedrooms started life as porches, enclosed but never insulated. Foam brings those thin-walled add-ons up to the standard of the house around them.

02THE FIX

Closed-Cell, Open-Cell, Injection: Old Houses Use All Three.

The chemistry follows the assembly. Here’s the honest split, and where cellulose still beats them all:

 Closed-Cell SprayRims, kneewalls, slopesInjection FoamInside closed walls
How it worksR-6.5–R-7 per inch, rigid, moisture-resistant, sprayed on open framingFlows into sealed cavities through small ports, cures in place, plaster untouched
Best forKneewalls, dormers, rim joists, cellar walls, porch conversionsShallow or blocked wall cavities behind finished plaster
Install time Half-day to one dayOne day, most homes
Cost per R-value Priced per board footPriced per cavity run
Air sealing Air seal built in Fills draft paths completely
Pest deterrence Seals rodent routes solid, Closes wall-void nesting space
Eco profile HFO low-GWP formulas, Minimal-disturbance install
Our verdict: the workhorse pair for pre-war Englewood homes.
When cellulose still wins: the open flat attic remains blown-in territory. See attic insulation in Englewood.
03WHAT TO EXPECT

Small Openings. Big Difference. No Demolition.

A foam day in an Englewood bungalow, start to finish:

STEP 1 · PREP
Protect the irreplaceable first

Original floors, trim, and plaster get masked and padded before anything else. Old-house work starts with respect for what cannot be re-bought.

STEP 2 · REMOVAL
Failed batts & debris out

Sagging kneewall batts and cellar debris clear out so foam bonds to clean framing, adhesion is everything in this work.

STEP 3 · AIR SEALING
Substrate checks old wood demands

Century-old lumber gets moisture-metered and temperature-checked; injection ports get drilled and mapped. Foam on unprepared old wood is a callback waiting to happen.

STEP 4 · INSTALLATION
Spray the open, inject the closed

Closed-cell goes onto rims, kneewalls, and slopes in gauged lifts; injection foam fills the closed cavities port by port until each one reads full.

STEP 5 · QUALITY CHECK
Patch, cure, hand back

Ports patched flush and ready for paint, overspray trimmed, thickness documented. Re-entry after the cure window, typically the same evening.

The Grizzly 100% Guarantee

If the work isn't right, we make it right. That's the reputation we've built across the Front Range, and it's our only sales pitch.

04COST & SAVINGS

What Spray Foam Costs in Englewood

Old-house foam is precision work priced by geometry: board feet on open framing, cavity runs for injection. Four drivers, itemized after a free assessment.

Assembly list

Kneewalls, rims, slopes, and cavity runs in scope

Method mix

Spray on open framing, injection behind plaster

Access & prep

Cellar clearance, port drilling, masking scope

Old-wood condition

Moisture and repair needs before application

Three ways the net cost drops

Xcel Energy rebates

Wall and air-sealing measures on old homes frequently qualify, every applicable credit lands in your estimate.

Federal 25C tax credit

30% of qualifying insulation costs, up to $1,200 per year, under the Inflation Reduction Act.

Preservation math

Foam upgrades the envelope without touching plaster or trim, the value of the old house stays intact while the bills drop.

★ ★ ★ ★ ★

"The upstairs of our 1919 house near Cushing Park was a freezer, bare kneewalls the whole length. They foamed the walls and slopes and injected the shallow cavities in a day. Same plaster, same trim, completely different winter."

W
Walter K.

Homeowner · Cushing Park, Englewood · Kneewall + Injection Foam

05QUESTIONS

Spray Foam in Englewood, Answered Straight

Prefer to just ask?

Call and talk to the crew that will actually be in your attic.

Because pre-war construction created spaces nothing else can insulate properly: two-inch cavities, blocked stud bays, kneewalls inches from the roof, rims over damp cellars. Foam reaches all of them through small openings at double fiber’s R-value per inch, without opening plaster.

Geometry sets it: board feet across kneewalls, rims, and slopes, plus per-run pricing for injection work. A rim-and-kneewall package on a bungalow is a moderate ticket with an outsized comfort return. Line items come in writing after the on-site measure.

No, protecting the plaster is the point. Foam enters through small drilled ports at controlled pressure, each port is patched flush and paint-ready afterward, and the wall face is never opened. It is the least invasive way to insulate a finished old wall.

Yes, with proper process. We verify substrate moisture and wiring condition first, knob-and-tube gets addressed before foam, ever, and application runs in controlled lifts with ventilation. Cured foam is inert and compatible with historic framing.

Most Englewood foam projects finish in one day: masking and prep in the morning, application midday, patch and cure check by afternoon. Re-entry follows the cure window, usually the same evening.

The upstairs half-story, immediately, kneewall foam transforms those bedrooms. Converted porches and rooms over cellars come next. Anywhere your house currently feels like the outside is winning is exactly where foam works hardest.

07GET STARTED

Warm the Rooms the 1920s Left Cold.

Free assessment of every kneewall, rim, and cavity. Preservation-minded methods. Pricing by the board foot, in writing.

Get Your Foam Assessment

Takes 30 seconds. We reply within 24 hours.